Biolynceus LLC – White Paper – Successes in Enhancing Nitrification in Activated Sludge and Lagoon Systems

BioLynceus LLC – White Paper – ProBiotic Scrubber®II Meets the Challenge of Mechanical Wastewater Treatment Operations Start Ups

BioLynceus-LLC-White-Paper-Results-of-Settleometer-Testing

BioLynceus-White-Paper-Kubota-MBR-System

BioLynceues-White-Paper-MWTF-aeration-basin-after-the-PBII-treatment

Click here to Purchase Probiotic Scrubber II

A white pail with a blue lid and a label for BioLynceus Probiotic Scrubber II

Click Here

Hydrocarbon Clean Up Program & Protocols

BioLynceus® products can be easily incorporated into areas of contamination. In soils, the program is used to “farm the soil” where temperature, moisture, sunlight/air and food sources create an environment of optimal degradation of the impacted areas. In-Situ soil and water programs can be easily encorporated into wells and plumes to reduce contaminated water.

All BioLynceus® products contain live cultures allowing for the highest level of active microbes to enhance the breakdown of many of the products found in oil and gas clean-up sites.

Site Uses

  • Improvement of Wastewater Discharging for Permits
  • Heavy Equipment Washdown: Grease Pits & Sand Filteration Equipment
  • Odor: Car Washes and Truck Washes
  • Storage Ponds, Lakes and Tanks

BioLynceus® Hydrocarbon Clean Up

  • Non-contaminating natural biological and bioaugmentation soil and water solutions
  • Highest level of CFU’s with petroleum product degrading microbiology
  • Programs to address soil food web in addition to chemical clean-up
  • Liquid products providing the highest level of active biological degradation of chemicals

Application Instructions On-Site Spillage

  1. Using a rake, scratch open the surface area to open the soil structure.
  2. Pour ProBiotic Scrubber product evenly over the surface area of the contamination.
  3. Using a rake, scratch the dirt and the product.
  4. Pour clean water over the contaminated and treated area to saturate the area.
  5. Re-apply product in 21 days as needed.
  6. Product and waster may be combined. Use only raw or untreated clean water.
Specific product use and application is best obtained from a BioLynceus® representative. Use prescribed application rates to formulate the exact amount of product to use for each site.

Figure 1. An oil spill that causes contamination in soil. BioLynceus® products contain live microbes that optimize the breakdown of oil and gases in contaminated soils.

BioLynceus® Hydrocarbon Remediation Programs

BioLynceus® has been treating environmental (and hydrocarbon) conditions for over twenty-five years around the country and has proven programs that are environmentally friendly and work on reducing hydro-carbons, gas, oil or diesel.

BioLynceus® provides live bacteria to increase bioremediation of petroleum chemical spills. BioLynceus® has discovered ways to improve the degradation of difficult petroleum and chemical compounds. Our products provide live microbial solutions to biologically remove petroleum hydrocarbons.

Our products allow indigenous microbes to adjust to the petroleum or chemical substrate. These microbes can then use this material for a food and degrade it to harmless compounds thereby reducing the contamination. Our microbial activators speed up the digestive process to a more efficient level. This biological enhancement supports the microbial food web to degrade the carbonaceous materials more efficiently.

BioLynceus® has developed organic-based nutrients that support the most efficient biological degradation. The ultimate goal of soil bioremediation is complete breakdown of chemicals to carbon dioxide, water and humus.

For information on how to obtain BioLynceus® hydrocarbon remediation products contact 970-586-3391 or sales@biolynceus.net

Contact US